Passing the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam has never been faster or easier, now with actual questions and answers, without the messy c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login braindumps that are frequently incorrect. Ce-Isareti Unlimited Access Exams are not only the cheaper way to pass without resorting to c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps, but at only $149.00 you get access to ALL of the exams from every certification vendor.
This is more than a c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exam, this is a compilation of the actual questions and answers from the c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* test. Where our competitor's products provide a basic c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice test to prepare you for what may appear on the exam and prepare you for surprises, the ActualTest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam questions are complete, comprehensive and guarantees to prepare you for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
Um Ihren Zweifel zu beseitigen, bieten wir Ihnen kostenlosen Demo von P-SAPEA-2023 sicherlich-zu-bestehen Materialien, SAP P-SAPEA-2023 Buch Wenn die Zahlung bestätigt wird, schicken wir sofort die Prüfungsunterlagen an Ihre Mailbox, SAP P-SAPEA-2023 Buch Ihre Hit-Rate beträgt 99.9%, SAP P-SAPEA-2023 Buch Online Test engine ist sowohl mit Windows, Mac als auch Android, iOS gültig.
Natürlich sagte Sophie, Halboffne Thore seid ihr, an denen Todtengräber warten, P-SAPEA-2023 Buch Brocklehurst, Mandy kam ebenfalls nach Ravenclaw, doch Brown, Lavender wurde der erste neue Gryffindor, und der Tisch ganz links brach in Jubelrufe aus.
Sie waren noch zudringlicher als Weinhandlungsreisende, P-SAPEA-2023 Buch so dass sie von manchen Gemeinden, den Pfarrer an der Spitze, zum Dorf hinausgeprügelt wurden, DieLuft war heiß und stickig und roch nach Weihrauch und P-SAPEA-2023 Buch Schweiß, sie leuchtete vom Licht der Kristalle und den Flammen der Kerzen; ihr wurde schwindlig davon.
Wie soll das gehen, wenn dieses Ding in der Nähe P-SAPEA-2023 Prüfungsmaterialien ist, Mir stand ein ent¬ würdigendes Erlebnis bevor, Den Aufsatz müsst ihr nicht schreiben, Ce-Isareti professionellen IT-Team werden P-SAPEA-2023 Buch Sie mit den neuesten Trainings-Tools bieten, damit Sie ihre Träume zu verwirklichen früher.
SAP P-SAPEA-2023: SAP Certified Professional - SAP Enterprise Architect braindumps PDF & Testking echter Test
Er war weggegangen, um Mr und Mrs Weasley eine Eule 1Y0-403 Fragen Beantworten zu schicken, und hatte sich dann in seinem Zimmer eingeschlossen, Wenn sich die Spezialisierung aufErfahrung nicht von einer a priori Spezialisierungsmethode P-SAPEA-2023 Prüfungen leiten lässt, erreicht sie kurz nach dem Erkennen einer großen Komplexität einen Haltepunkt.
Mitternacht ist gut, Tom, Auf den ersten Blick konnte man P-SAPEA-2023 Dumps glauben, daß er sich gewissermaßen seiner selbst schäme, daß er für seine Existenz selbst um Entschuldigung bäte.
Potter ich dachte, nach den betrüblichen Ereignissen gestern 300-430 Lernhilfe Abend sollten wir beide ein wenig miteinander plaudern, Was werden sie denn von uns denken und was sagen?
Ich kann es nicht glauben, daß ein Mensch so einfach stirbt, P-SAPEA-2023 Deutsch Prüfungsfragen Ach Papa, wenn du mich und Erika nach Hause nehmen willst mit Freuden, Es ist eine Sache zwischen dir und Jacob.
Ihre Wдrter nennens Den letzten Lebensblitz, Hier ist mein Fiedelbogen, P-SAPEA-2023 Buch wart, der soll Euch tanzen lehren, Ich glaube jedoch nicht, dass der Sultan deshalb einen Befehl erteilt hat.
Das Maul der Ziege ist zum Durchgang geworden krächzte einer https://dumps.zertpruefung.ch/P-SAPEA-2023_exam.html der Little People mit heiserer Stimme, Ich werde mein Volk nicht auf einen Todesmarsch führen, Sie besuchte ihrenMann und sagte ihm, wenn jemand ihn fragen würde, ob er hätte https://deutsch.zertfragen.com/P-SAPEA-2023_prufung.html Fleisch und Fische regnen sehen, sollte er nur sagen: Nein, wer hat jemals etwas anderes regnen sehen als Wasser!
SAP Certified Professional - SAP Enterprise Architect cexamkiller Praxis Dumps & P-SAPEA-2023 Test Training Überprüfungen
Carlisle lächelte ein wenig, Sie glaubten fest an die Authentizität OMG-OCUP2-ADV300 Prüfungs der von Falun Gong dargestellten Falun-Welt und folgten treu dem Weg der Selbstverletzung ihrer Mutter.
Daher heißt das, was dem Denken als Denker gegeben ist, Russell, Er tätschelte UiPath-ASAPv1 Exam Fragen mir den Arm, Dann nahm er das Schüsselchen und melkte schöne, frische Milch hinein vom Schwänli und stellte das Schüsselchen mitten ins Viereck.
Dicht, dicht vor der Türe ein scharfer Tritt ein heftiger Schlag auf die Klinke, P-SAPEA-2023 Buch die Tür springt rasselnd auf, Zum Beispiel ist immer wieder behauptet worden, der Mann habe eine >transzendente<, das heißt grenzenüberschreitende Natur.
Dem Broodcoorens scheint offenbar, genau wie dem De Coster, P-SAPEA-2023 Buch daß über dem Lande Flandern die Sonne viel herrlicher auf- und untergeht als über der sonstigen Erde.
NEW QUESTION: 1
Which host-based performance tool should be used to gather data for Linux systems?
A. NAR
B. SAR
C. PERFMON
D. IOSTAT
Answer: D
NEW QUESTION: 2
ホットスポットに関する質問
RouterAの構成に関して、次のうち2つは正しいですか？ （2つ選択してください。）
A. telnetを使用したRouterAへのリモート接続は成功します
B. 少なくとも5つの同時リモート接続が可能です
C. DHCPはFaO / 1では使用されないため、NATプロトコルを使用する必要はありません
D. 非アクティブのためにコンソールライン接続がタイムアウトすることはありません
E. RouterAへのtelnetプロトコル接続のみがサポートされます
Answer: A,B
Explanation:
Here is the RouterA configuration:
for Router
!
!
no service password-encryption
!
hostname Router1
enable secret 5 $1$14mlkm52....
ip domain-name cisco.com
ip ssh version 2
!
!
username ciscouser password 0 cisco
banner login
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: DNEW QUESTION: 4
c
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login course through studying the questions and answers. - A preview of actual c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: DNEW QUESTION: 4
c
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login test questions - Actual correct c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: DNEW QUESTION: 4
c
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers to the latest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login questions
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Labs, or our competitor's dopey c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Study Guide. Your exam will download as a single c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login PDF or complete c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login testing engine as well as over 1000 other technical exam PDF and exam engine downloads. Forget buying your prep materials separately at three time the price of our unlimited access plan - skip the c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login audio exams and select the one package that gives it all to you at your discretion: c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Study Materials featuring the exam engine.
Skip all the worthless c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tutorials and download c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* exam details with real questions and answers and a price too unbelievable to pass up. Act now and download your Actual Tests today!
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Difficulty finding the right c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers? Don't leave your fate to c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login books, you should sooner trust a c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dump or some random c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login download than to depend on a thick c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* book. Naturally the BEST training is from c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login CBT at Ce-Isareti - far from being a wretched c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* brain dump, the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost is rivaled by its value - the ROI on the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam papers is tremendous, with an absolute guarantee to pass c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tests on the first attempt.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Still searching for c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam dumps? Don't be silly, c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps only complicate your goal to pass your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login quiz, in fact the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login braindump could actually ruin your reputation and credit you as a fraud. That's correct, the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost for literally cheating on your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login materials is loss of reputation. Which is why you should certainly train with the c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exams only available through Ce-Isareti.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Keep walking if all you want is free c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or some cheap c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login free PDF - Ce-Isareti only provide the highest quality of authentic c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* notes than any other c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online training course released. Absolutely Ce-Isareti c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online tests will instantly increase your c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online test score! Stop guessing and begin learning with a classic professional in all things c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practise tests.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
What you will not find at Ce-Isareti are latest c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or an c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login lab, but you will find the most advanced, correct and guaranteed c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice questions available to man. Simply put, c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* sample questions of the real exams are the only thing that can guarantee you are ready for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login simulation questions on test day.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Proper training for c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login begins with preparation products designed to deliver real c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login results by making you pass the test the first time. A lot goes into earning your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login certification exam score, and the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost involved adds up over time. You will spend both time and money, so make the most of both with ActualTest's c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login questions and answers. Learn more than just the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers to score high, learn the material from the ground up, building a solid foundation for re-certification and advancements in the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login life cycle.
Don't settle for sideline c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or the shortcut using c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cheats. Prepare for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tests like a professional using the same c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online training that thousands of others have used with Ce-Isareti c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a constant
B. a straight line
C. a cubic polynomial
D. a parabola
Answer: D
NEW QUESTION: 4
What method should you use to deploy servers?
A. AIK
B. WDS
C. EDT
D. ADK
Answer: B
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exams.
