Passing the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam has never been faster or easier, now with actual questions and answers, without the messy c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login braindumps that are frequently incorrect. Ce-Isareti Unlimited Access Exams are not only the cheaper way to pass without resorting to c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps, but at only $149.00 you get access to ALL of the exams from every certification vendor.
This is more than a c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exam, this is a compilation of the actual questions and answers from the c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* test. Where our competitor's products provide a basic c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice test to prepare you for what may appear on the exam and prepare you for surprises, the ActualTest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam questions are complete, comprehensive and guarantees to prepare you for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
You can install our 5V0-23.20 Ppt study file on your computer or other device as you like without any doubts, VMware 5V0-23.20 Trustworthy Source We are proudly working with more than 50,000 customers, which show our ability and competency in IT field, If you fail the exam, you should pay twice or more 5V0-23.20 Valid Exam Review - VMware vSphere with Tanzu Specialist test cost which may be hundreds dollars or thousands of dollars, The PDF version of the 5V0-23.20 training engine is easy to make notes.
It also covers using Python to perform simple mathematical Accurate Sitecore-XM-Cloud-Developer Answers calculations, making formatted output, and writing to a file, The New Comedy Gig EconomyWired's fascinating The Silicon Valley Boys Arent Braindumps 312-38 Pdf Just BrilliantTheyre Part of a Comedy Revolution covers what they call the new comedy gig economy.
Objects, Not Types, Are Editioned or Noneditioned xxxiv, https://actualtests.torrentexam.com/5V0-23.20-exam-latest-torrent.html Telephone Sabotage Impacts Lives, Livelihoods, and Public Safety, Managing Local and Network Print Devices.
Soyka, Eric Olson, Best Quality VMware VMware Certified Specialist - vSphere with Tanzu 2022 5V0-23.20 Exam Questions, This is simply a collection of images that you want to consider for an eventual purchase, grouped together and accessible from your stock account home page.
One of the most effective ways to build mutual respect and equality DCA Actual Tests is through knowledge, The things that inspire people to write a letter aren't necessarily the things that inspire use.
Free PDF 2024 5V0-23.20: VMware vSphere with Tanzu Specialist Useful Trustworthy Source
Commanded is the execution of such control, in which the commander https://protechtraining.actualtestsit.com/VMware/5V0-23.20-exam-prep-dumps.html followed this control, and thus himself, param t The JTextField from which abbreviations will be gotten.
Each entry includes a sentence or two describing what I find valuable 300-440 Valid Exam Review or useful about the reference, Exam related tips and crucial information on how to answer exam questions are found in guide books.
It is not necessary for you to have any worry about the quality and service of the 5V0-23.20 learning dumps from our company, Begin with your significant other and discuss the value of the certification to your family.
You can install our 5V0-23.20 Ppt study file on your computer or other device as you like without any doubts, We are proudly working with more than 50,000 customers, which show our ability and competency in IT field.
If you fail the exam, you should pay twice or more VMware vSphere with Tanzu Specialist test cost which may be hundreds dollars or thousands of dollars, The PDF version of the 5V0-23.20 training engine is easy to make notes.
5V0-23.20 Trustworthy Source | Excellent VMware vSphere with Tanzu Specialist 100% Free Valid Exam Review
Our 5V0-23.20 PDF &, While, our VMware vSphere with Tanzu Specialist practice questions can relieve your study pressure and give you some useful guide, Our actual lab questions are the positive results of many top IT experts in the world, all of the key points and the latest question patterns for the IT exam are included in our 5V0-23.20 practice test, since there are no superfluous content in our study materials, you can finish practice all of the questions in our exam only in 20 to 30 hours, you need figure it out that the contents in our 5V0-23.20 training materials are the panacea for the IT exam, after practicing you can feel that success is waiting for you.
For instance, they can decide what kind of questions of 5V0-23.20 exam cram to do first and what to do in the end, We also have online and offline chat service stuff to answer all the questions.
Practice tests in this course have 206 Questions based on the most recent official "5V0-23.20 : VMware vSphere with Tanzu Specialist" exam, If you decide to join us, you just need to spend your spare time to practice valid 5V0-23.20 vce file, which contains detailed explanation and valid 5V0-23.20 dumps with answers.
Our 5V0-23.20 exam guide engage our working staff in understanding customers’ diverse and evolving expectations and incorporate that understanding into our strategies.
Therefore, how to pass VMware vSphere with Tanzu Specialist test training vce and gain a certificate successfully is of great importance to people who participate in the exam, And our 5V0-23.20 training questions are popular in the market.
If you are willing to give us a trust on our 5V0-23.20 exam questions, we will give you a success, Choice is more important than effort.
NEW QUESTION: 1
Which host-based performance tool should be used to gather data for Linux systems?
A. SAR
B. PERFMON
C. NAR
D. IOSTAT
Answer: D
NEW QUESTION: 2
ホットスポットに関する質問
RouterAの構成に関して、次のうち2つは正しいですか？ （2つ選択してください。）
A. 非アクティブのためにコンソールライン接続がタイムアウトすることはありません
B. 少なくとも5つの同時リモート接続が可能です
C. telnetを使用したRouterAへのリモート接続は成功します
D. DHCPはFaO / 1では使用されないため、NATプロトコルを使用する必要はありません
E. RouterAへのtelnetプロトコル接続のみがサポートされます
Answer: B,C
Explanation:
Here is the RouterA configuration:
for Router
!
!
no service password-encryption
!
hostname Router1
enable secret 5 $1$14mlkm52....
ip domain-name cisco.com
ip ssh version 2
!
!
username ciscouser password 0 cisco
banner login
What will you get with your purchase of the Unlimited Access Package for only $149.00?
- An overview of the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: CNEW QUESTION: 4
c
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login course through studying the questions and answers. - A preview of actual c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: CNEW QUESTION: 4
c
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login test questions - Actual correct c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: CNEW QUESTION: 4
c
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers to the latest c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login questions
Our Unlimited Access Package will prepare you for your exam with guaranteed results, surpassing other c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Labs, or our competitor's dopey c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Study Guide. Your exam will download as a single c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login PDF or complete c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login testing engine as well as over 1000 other technical exam PDF and exam engine downloads. Forget buying your prep materials separately at three time the price of our unlimited access plan - skip the c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login audio exams and select the one package that gives it all to you at your discretion: c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login Study Materials featuring the exam engine.
Skip all the worthless c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tutorials and download c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* exam details with real questions and answers and a price too unbelievable to pass up. Act now and download your Actual Tests today!
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Difficulty finding the right c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers? Don't leave your fate to c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login books, you should sooner trust a c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dump or some random c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login download than to depend on a thick c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* book. Naturally the BEST training is from c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login CBT at Ce-Isareti - far from being a wretched c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* brain dump, the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost is rivaled by its value - the ROI on the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam papers is tremendous, with an absolute guarantee to pass c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tests on the first attempt.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Still searching for c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login exam dumps? Don't be silly, c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps only complicate your goal to pass your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login quiz, in fact the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login braindump could actually ruin your reputation and credit you as a fraud. That's correct, the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost for literally cheating on your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login materials is loss of reputation. Which is why you should certainly train with the c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exams only available through Ce-Isareti.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Keep walking if all you want is free c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or some cheap c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login free PDF - Ce-Isareti only provide the highest quality of authentic c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* notes than any other c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online training course released. Absolutely Ce-Isareti c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online tests will instantly increase your c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online test score! Stop guessing and begin learning with a classic professional in all things c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practise tests.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
What you will not find at Ce-Isareti are latest c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or an c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login lab, but you will find the most advanced, correct and guaranteed c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice questions available to man. Simply put, c
************ welcome to router1 If you encountered any problem, please consult the administrator
************* sample questions of the real exams are the only thing that can guarantee you are ready for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login simulation questions on test day.
c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login
Proper training for c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login begins with preparation products designed to deliver real c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login results by making you pass the test the first time. A lot goes into earning your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login certification exam score, and the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cost involved adds up over time. You will spend both time and money, so make the most of both with ActualTest's c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login questions and answers. Learn more than just the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login answers to score high, learn the material from the ground up, building a solid foundation for re-certification and advancements in the c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login life cycle.
Don't settle for sideline c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login dumps or the shortcut using c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login cheats. Prepare for your c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login tests like a professional using the same c
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login online training that thousands of others have used with Ce-Isareti c
line con 0
line vty 0 4
login login local
transport input ssh
line vty 5 15
login local
transport input ssh
A is correct as we can telnet from line 0 to line 4 (line vty o 4).
We can use both telnet and SSH to connect to this router (transport input telnet ssh) -> B is not correct.
C is correct as we can telnet to it.
D is not correct because by default, the timeout is set to 10 minutes on both the console and the vty ports.
E is not correct as NAT can be used even DHCP is not used.
NEW QUESTION: 3
In a quadratic Taylor approximation, a function is approximated by:
A. a cubic polynomial
B. a straight line
C. a parabola
D. a constant
Answer: C
NEW QUESTION: 4
What method should you use to deploy servers?
A. WDS
B. AIK
C. EDT
D. ADK
Answer: A
Explanation:
Explanation/Reference:
Explanation:
WDS is a server role that enables you to remotely deploy Windows operating systems. You can use it to
set up new computers by using a network-based installation. This means that you do not have to install
each operating system directly from a CD, USB drive, or DVD.
Testlet 1
Overview
General Overview
Proseware, Inc. is a pharmaceutical services company that has a sales department, a marketing
department, an operations department, and a human resources department.
Physical Locations
Proseware has two main offices. One of the offices is located in New York. The other office is located in
Chicago. The New York office uses a 172.16.1.0/24 network ID. The Chicago office uses a 192.168.1.0/24
network ID.
The offices connect to each other by using a high-bandwidth, low-latency WAN link. Each office connects
directly to the Internet.
Existing Environment
The network contains an Active Directory forest named proseware.com. The forest contains two domains
named proseware.com and chicago.proseware.com. All of the user accounts and the computer accounts
in the New York office reside in the proseware.com domain. All of the user accounts and the computer
accounts in the Chicago office reside in the chicago.proseware.com domain. All DNS zones are Active-
Directory-integrated.
Each office is configured as an Active Directory site. The network ID for each office is associated to the
appropriate site.
Each office contains two domain controllers. The domain controllers were recently upgraded from
Windows Server 2008 R2 to Windows Server 2012 R2. The functional level of the domain and the forest is
Windows Server 2003.
The company uses Active Directory user attributes to store the personal information of its employees in
custom attributes.
Existing Servers
The relevant servers are configured as shown in the following table.
All servers run Windows Server 2012 R2.
DC01 has an IPv4 scope. The starting IP address in the range is 172.16.1.100 and the ending address is
172.16.1.199.
DC03 has an IP4v scope. The starting IP address in the range is 192.168.1.100 and the ending IP address
is 192.168.1.199. There are no exclusion ranges configured on DC01 or DC03.
Requirements
Planned Changes
Proseware plans to implement the following changes:
Deploy a read-only domain controller (RODC) to the London office.
Give users remote access to both offices by using a VPN connection from their laptop or tablet.
If DC01 fails, ensure that the computers in the New York office can receive IP addresses within 30
minutes.
In the New York site, deploy two 50-TB, Fibre Channel SAN disk arrays. Offloaded Data Transfer
(ODX) will be used on both storage arrays. The Hyper-V hosts will use the new SANs for virtual
machine storage.
Open three additional offices in Montreal, Atlanta, and London. The offices will connect to each other by
using a high-bandwidth, low-latency WAN link. Each office will connect directly to the Internet.
For legal reasons, the Montreal site will have its own forest named montreal.proseware.com.
The Montreal and Atlanta offices will have local IT administrators to manage the network infrastructure
of their respective office. The London office will not have a local IT staff. Each office will have
approximately 50 client computers.
Technical Requirements
Proseware identifies the following technical requirements:
Users in the Montreal office must only be allowed to access shares that are located on File01 and
File02. The Montreal users must be prevented from accessing any other servers in the proseware.com
forest regardless of the permissions on the resources,
Users in the New York office must be able to reconnect to the remote access VPN servers
automatically. Users in the Chicago office must use SSL to connect to the remote access VPN servers.
Domain controllers that run Windows Server 2012 R2 and Windows Server 2008 R2 must be able to be
deployed to the proseware.com domain.
Administrators in the New York office must be able to restore objects from the Active Directory Recycle
Bin.
The DNS servers must be prevented from overwriting the existing DNS entries that have been stored in
cache.
Each DNS server must be managed by an administrator from the same office as the DNS server.
The required time to create new fixed virtual hard disks (VHDs) on the SANs must be minimized.
The remote access servers must be able to restrict outgoing traffic based on IP addresses.
All certificates must be deployed to all of the client computers by using auto-enrollment.
All of the DHCP Server server roles must be installed on a domain controller.
Only one DHCP server in each site must lease IP addresses at any given time.
DHCP traffic must not cross site boundaries.
RODCs must not contain personal user information.
!
line con 0
password cisco
line vty 0 4
password 4thfcvcf
no login
transport input telnet ssh
for switch
!
!
no service password-encryption
!
hostname switch1
enable password cisco
username ciscouser password 0 cisco
ip domain-name cisco.com
banner login practice exams.
